Discount 3% for Zelle, Check, Money Order, Wire, and Bank Transfer.
The XP118 is a compact, high performance subwoofer for indoor use with the XP12 and XP15 full-range loudspeakers. It extends the low frequency operating range of the combined system down to 42Hz and can be used singly, stacked in omni or cardioid mode, or flown via integral M10 insets.
The loudspeaker shall be a self-powered subwoofer consisting of an 18” reflex-loaded, long-excursion, low frequency transducer. The on-axis frequency response shall be 42Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 137dB peak at 1 metre.
The loudspeaker shall incorporate a Class D amplifier which shall deliver 2000W peak output to the transducer. Onboard DSP shall perform crossover and limiter functions. Selection of operating modes , including cardioid, shall be effected by a rotary encoder and display screen on the rear panel. Bluetooth control and streaming shall be available as on option. The power supply shall employ Power Factor Correction and operate from 100-240V, 50-60Hz AC.
Audio input connectors shall be female XLR type combined with a ¼” jack. The AC power connector shall be a 3-pin IEC connector.
The loudspeaker enclosure shall be constructed from multi-laminate plywood with a black textured coating and be fitted with a pole-mount socket, grab handles and M10 flying inserts. The driver shall be protected by a perforated steel grille.
Dimensions (W x H x D) shall be 662mm x 536mm x 640mm (26.1in x 21.1in x 25.2in). Weight shall be 44kg (97lbs).
The loudspeaker shall be the Martin Audio XP118.
| Acoustics | |
| TYPE | Compact, Self-powered Subwoofer |
| FREQUENCY RESPONSE (5) | 42Hz –150Hz ±3dB -10dB @ 38Hz |
| DRIVER | 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet |
| MAXIMUM SPL (9) | 131dB continuous, 137dB peak (half space) |
| DISPERSION (-6dB) | Omnidirectional |
| CROSSOVER | 100Hz, active |
| Module Audio In/Out | |
| INPUT CONNECTORS | 2 x female XLR/ 1⁄4” jack combo |
| MIC/LINE INPUT IMPEDANCE | 8 kΩ balanced |
| 1⁄4” JACK TS INPUT IMPEDANCE | 1 MΩ unbalanced |
| MIX OUTPUT CONNECTOR | 1 x male XLR |
| MIX OUTPUT IMPEDANCE | 600Ω balanced |
| Internal Processing | |
| Input channel EQ | 3 band |
| Speaker EQ | 2 presets: XP118 with XP12, XP118 with XP15 |
| Protection | Peak and RMS limiting, amplifier thermal protection |
| Amplifier Module | |
| TYPE | Class D, Bridged Tied |
| PEAK OUTPUT POWER | 2000W total |
| AVERAGE EFFICIENCY | 89% |
| COOLING | Convection |
| MAXIMUM AMBIENT TEMPERATURE | 35°C (95°F) for full output |
| Power Supply | |
| TYPE | Switch-mode, fixed frequency with PFC |
| AC INPUT OPERATING RANGE | 100 – 240V ~ AC, 50 – 60Hz |
| POWER FACTOR | > 0.98 |
| NOMINAL POWER CONSUMPTION | 1000W Max |
| MAINS CONNECTOR | 3-pin IEC |
| Mechanical | |
| ENCLOSURE | Birch/poplar ply |
| FINISH | Black textured paint |
| PROTECTIVE GRILLE | Black perforated steel |
| FITTINGS | 16 x M10 inserts, pole-mount socket 2 x bar handles, provision for castors |
| DIMENSIONS | (W) 662mm x (H) 536mm x (D) 640mm (W) 26.1in x (H) 21.1in x (D) 25.2in |
| WEIGHT | 44kg (97lbs) |
Only logged in customers who have purchased this product may leave a review.
| Brand | Martin-Audio | JBL | JBL | JBL | QSC |
|---|---|---|---|---|---|
| Image |
 |
 |
 |
|
 |
| Product | Martin Audio XP118 | JBL Professional SRX818S Portable Passive Subwoofer System, 18-Inch, Black | JBL PRX918XLF Professional Powered 18-inch Subwoofer | JBL PRX915XLF Professional Powered 15-inch Subwoofer | QSC KS112 |
| Price | $1,573.00 | $1,589.00 | $1,549.00 | $1,349.00 | $1,299.99 |
| Old Price |
|
|
|
|
|
| Discount | ↓ Save 15% | ↓ Save 19% | ↓ Save 20% | ↓ Save 24% | ↓ Save 20% |
| Stock Status | In stock | In stock | In stock | In stock | In stock |
| Speaker Size | — | 18" | 18" | — | 12" |
| Powered or Passive | — | Passive | Powered | — | Powered |
| View | View Product | View Product | View Product | View Product | View Product |
Discount 3% for Zelle, Check, Money Order, Wire, and Bank Transfer.
The XP118 is a compact, high performance subwoofer for indoor use with the XP12 and XP15 full-range loudspeakers. It extends the low frequency operating range of the combined system down to 42Hz and can be used singly, stacked in omni or cardioid mode, or flown via integral M10 insets.
The loudspeaker shall be a self-powered subwoofer consisting of an 18” reflex-loaded, long-excursion, low frequency transducer. The on-axis frequency response shall be 42Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 137dB peak at 1 metre.
The loudspeaker shall incorporate a Class D amplifier which shall deliver 2000W peak output to the transducer. Onboard DSP shall perform crossover and limiter functions. Selection of operating modes , including cardioid, shall be effected by a rotary encoder and display screen on the rear panel. Bluetooth control and streaming shall be available as on option. The power supply shall employ Power Factor Correction and operate from 100-240V, 50-60Hz AC.
Audio input connectors shall be female XLR type combined with a ¼” jack. The AC power connector shall be a 3-pin IEC connector.
The loudspeaker enclosure shall be constructed from multi-laminate plywood with a black textured coating and be fitted with a pole-mount socket, grab handles and M10 flying inserts. The driver shall be protected by a perforated steel grille.
Dimensions (W x H x D) shall be 662mm x 536mm x 640mm (26.1in x 21.1in x 25.2in). Weight shall be 44kg (97lbs).
The loudspeaker shall be the Martin Audio XP118.
| Acoustics | |
| TYPE | Compact, Self-powered Subwoofer |
| FREQUENCY RESPONSE (5) | 42Hz –150Hz ±3dB -10dB @ 38Hz |
| DRIVER | 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet |
| MAXIMUM SPL (9) | 131dB continuous, 137dB peak (half space) |
| DISPERSION (-6dB) | Omnidirectional |
| CROSSOVER | 100Hz, active |
| Module Audio In/Out | |
| INPUT CONNECTORS | 2 x female XLR/ 1⁄4” jack combo |
| MIC/LINE INPUT IMPEDANCE | 8 kΩ balanced |
| 1⁄4” JACK TS INPUT IMPEDANCE | 1 MΩ unbalanced |
| MIX OUTPUT CONNECTOR | 1 x male XLR |
| MIX OUTPUT IMPEDANCE | 600Ω balanced |
| Internal Processing | |
| Input channel EQ | 3 band |
| Speaker EQ | 2 presets: XP118 with XP12, XP118 with XP15 |
| Protection | Peak and RMS limiting, amplifier thermal protection |
| Amplifier Module | |
| TYPE | Class D, Bridged Tied |
| PEAK OUTPUT POWER | 2000W total |
| AVERAGE EFFICIENCY | 89% |
| COOLING | Convection |
| MAXIMUM AMBIENT TEMPERATURE | 35°C (95°F) for full output |
| Power Supply | |
| TYPE | Switch-mode, fixed frequency with PFC |
| AC INPUT OPERATING RANGE | 100 – 240V ~ AC, 50 – 60Hz |
| POWER FACTOR | > 0.98 |
| NOMINAL POWER CONSUMPTION | 1000W Max |
| MAINS CONNECTOR | 3-pin IEC |
| Mechanical | |
| ENCLOSURE | Birch/poplar ply |
| FINISH | Black textured paint |
| PROTECTIVE GRILLE | Black perforated steel |
| FITTINGS | 16 x M10 inserts, pole-mount socket 2 x bar handles, provision for castors |
| DIMENSIONS | (W) 662mm x (H) 536mm x (D) 640mm (W) 26.1in x (H) 21.1in x (D) 25.2in |
| WEIGHT | 44kg (97lbs) |
Only logged in customers who have purchased this product may leave a review.
| Brand | Martin-Audio | JBL | JBL | JBL | QSC |
|---|---|---|---|---|---|
| Image |
|
|
|
|
|
| Product | Martin Audio XP118 | JBL Professional SRX818S Portable Passive Subwoofer System, 18-Inch, Black | JBL PRX918XLF Professional Powered 18-inch Subwoofer | JBL PRX915XLF Professional Powered 15-inch Subwoofer | QSC KS112 |
| Price | $1,573.00 | $1,589.00 | $1,549.00 | $1,349.00 | $1,299.99 |
| Old Price |
|
|
|
|
|
| Discount | ↓ Save 15% | ↓ Save 19% | ↓ Save 20% | ↓ Save 24% | ↓ Save 20% |
| Stock Status | In stock | In stock | In stock | In stock | In stock |
| Speaker Size | — | 18" | 18" | — | 12" |
| Powered or Passive | — | Passive | Powered | — | Powered |
| View | View Product | View Product | View Product | View Product | View Product |
